 |
|
| Call Us Toll Free: 1-877-438-5872 | |
Description:
The Sport Series has all of the same features as the more expensive Carbon Fiber Hans Devices, but is an injection molded composite design. The Sport Series has all the safety features as the Pro series, but is about 1 pound heavier.
* Injection molded super structural carbon fiber
* Available in 20 and 30 degree for various seating applications
* Fits most racers in most cars
* Available in Super Small, Small, Medium and Large sizes
How to Order your Hans(all models)-
Version- Choose 10, 20, 30 or 40 degree angle to match your seating configuration.
10 Degree-The more upright you sit the less of an angle you will need. As a rule, sprint cars and other vehicles with an extreme vertical seating position use a 10 degree.
20 Degree-Oval track cars, road racing sedans and most seats with a slight angle as would be found in a passenger car will require a 20 degree angle; the 20 degree is the most popular.
30-40 Degree-Open wheel cars or car with layed back seating style will require a 30 or 40 degree angle. See image at bottom of this page for more information.
Choose Your Size-Use neck size chart at the bottom of this page.
Helmet Anchor-
Post Anchor- is the standard that allows tether to be removed with a slight push-and-slide motion.
QuickClick- helmet anchors allow fast release of the tethers with a push button release (see image Gallery).
Helmet Mount-There are two types of mounting systems for the helmets, but SA being the most common. If your helmets certification tag on the inside says SA2010, order SA helmet mounts. If your helmet's certification Tag says SAH2010, order SAH helmet anchors.
Tether Type-(Sport is only available with sliding Tethers)
Sliding Tether- Allows for about 20 degrees of left-right helmet movement.
Carbon Fiber Pro Series or Composite Sport Series?
Some models are available in different series. The only difference is weight - all HANS Devices offer the same class-leading protection. The Professional Series weighs about 1 pound and the Sport Series weighs about 2.25 pounds, the Sport II weights 1.75lbs. Weights vary due to size and accessories.
* Injection molded super structural carbon fiber
* Available in 20 and 30 degree for various seating applications
* Fits most racers in most cars
* Available in Super Small, Small, Medium and Large sizes
How to Order your Hans(all models)-
Version- Choose 10, 20, 30 or 40 degree angle to match your seating configuration.
10 Degree-The more upright you sit the less of an angle you will need. As a rule, sprint cars and other vehicles with an extreme vertical seating position use a 10 degree.
20 Degree-Oval track cars, road racing sedans and most seats with a slight angle as would be found in a passenger car will require a 20 degree angle; the 20 degree is the most popular.
30-40 Degree-Open wheel cars or car with layed back seating style will require a 30 or 40 degree angle. See image at bottom of this page for more information.
Choose Your Size-Use neck size chart at the bottom of this page.
Helmet Anchor-
Post Anchor- is the standard that allows tether to be removed with a slight push-and-slide motion.
QuickClick- helmet anchors allow fast release of the tethers with a push button release (see image Gallery).
Helmet Mount-There are two types of mounting systems for the helmets, but SA being the most common. If your helmets certification tag on the inside says SA2010, order SA helmet mounts. If your helmet's certification Tag says SAH2010, order SAH helmet anchors.
Tether Type-(Sport is only available with sliding Tethers)
Sliding Tether- Allows for about 20 degrees of left-right helmet movement.
Carbon Fiber Pro Series or Composite Sport Series?
Some models are available in different series. The only difference is weight - all HANS Devices offer the same class-leading protection. The Professional Series weighs about 1 pound and the Sport Series weighs about 2.25 pounds, the Sport II weights 1.75lbs. Weights vary due to size and accessories.
Sizing Charts:
| Choosing and Fitting Your HANS Device |
| 1. SEATBACK ANGLE For comfort the HANS should match the angle of your seatback.
2. HELMET ANCHOR INSTALLATION The HANS Device attaches to your helmet via two metal anchors. 90% of our customers install their own anchors - all you need is a 1/4 inch drill and measuring tape. Devices come with instructions plus a special installation tool. If you prefer we will install the anchors for you as an extra cost option. Please select this service in Parts and Accessories to let us know you prefer this. 3. PROFESSIONAL SERIES and EXTRA SERIES Some models are available in lightweight (Professional) and regular (Extra) series. NOTE: Extra formerly called Economy. The only difference is weight - about 6 - 8 ounces depending on size. There is no performance difference between the series. |
Recommended products:
Customers who bought this product also bought the following products:
|
|||||
