 |
|
| Call Us Toll Free: 1-877-438-5872 | |
Description:
The redesigned GTX.2 is an ideal choice for racers competing in open wheel, open compartment, formula, karting or dirt track forms of racing. The Snell SA2010/FIA8858 GTX.2 features sleek aero styling including a front chin gurney and integrated rear wing for enhanced aerodynamic stability at higher speeds. With an ultra-lightweight carbon composite shell and pro-style interior for outstanding comfort.
The design of the GTX.2 is effective at preventing dust and dirt from entering the helmet by combining a venturi air exchange system with Bell's innovative eyeport foam tape and positive locking mechanism that seals the visor. The venturi ventilation system allows air to exchange inside the helmet. As air flows over the helmet, the venturi effect increases cooling inside the helmet and prevents shield fogging by creating a vacuum to pull airflow through the helmet. The rear facing chin bar vents and rear exhaust vents allow ventilation while minimizing dust and dirt inside the helmet.
• Ultra-Lightweight Carbon Composite Shell Technology
• Standard Eyeport
• Venturi Air Exchange System • Integrated Aero Wing
• 287/3MM SRV Shield (SRV-2 Pivot System)
• E-Max Plus Multi Density Liner
• Pro Style Comfort-Plus Interior
• M6 Terminal Hardware for Head & Neck Restraint Device Anchor Systems
• Available in White and Rubberized Matte Black
The design of the GTX.2 is effective at preventing dust and dirt from entering the helmet by combining a venturi air exchange system with Bell's innovative eyeport foam tape and positive locking mechanism that seals the visor. The venturi ventilation system allows air to exchange inside the helmet. As air flows over the helmet, the venturi effect increases cooling inside the helmet and prevents shield fogging by creating a vacuum to pull airflow through the helmet. The rear facing chin bar vents and rear exhaust vents allow ventilation while minimizing dust and dirt inside the helmet.
• Ultra-Lightweight Carbon Composite Shell Technology
• Standard Eyeport
• Venturi Air Exchange System • Integrated Aero Wing
• 287/3MM SRV Shield (SRV-2 Pivot System)
• E-Max Plus Multi Density Liner
• Pro Style Comfort-Plus Interior
• M6 Terminal Hardware for Head & Neck Restraint Device Anchor Systems
• Available in White and Rubberized Matte Black
|
Primary Use:
Auto Racing Rating: SA2010 / FIA8858 Eye Port: Standard Interior Liner: Interior Shell foam: E-Max Plus Colors Available: White, Rubberized Black Origin: Sizes Available: 6-7/8 thu 7-3/4 Shell Material: Fiber-Tech Composite Adjustable Air Vents: Yes Fresh Air Inlet Port: No Drilled for Hans: Yes |
Sizing Charts:
To calculate helmet size, use a cloth tape measure or string to measure the circumference of your head.
Place the tape approximately 1” above the eyebrows, run it just above the ears and around the back of the
head at the point farthest from the forehead. Find your measurement on the table below to figure out your
helmet size. If you fall in-between sizes opt for the larger size.
RESOURCES:
RESOURCES:
- Helmet Sizing Chart (PDF, 171KB)
- Snell Helmet testing information (DOC, 84KB)
Recommended products:
Customers who bought this product also bought the following products:
|
|||||
